Enabling Ec500 Remotely - Avaya

EC500 User Manual

Enabling EC500
NOTE:
If you do not receive a confirmation tone, hang up, verify the codes entered
and repeat this procedure from Step 1. If you still do not receive a
confirmation tone, contact your system administrator for assistance.
If you are administered to send office caller ID, it will not be affected by the enable
or disable procedures. Only the receipt of calls at the cell phone is affected.

Enabling EC500 remotely

NOTE:
You should have the EC500 "enable" feature access code and EC500
access number recorded on your pocket reference card.
1. From any touch-tone phone, dial the EC500 access number.
You hear a dial tone.
2. Enter the EC500 "enable" feature access code.
You hear a dial tone.
3. Enter your office phone's extension number.
4. Press # on your telephone keypad.
5. Enter the station security code provided by your system administrator.
6. Press # on your telephone keypad.
You hear a confirmation tone indicating EC500 is enabled.
7. Hang up to end the call.
NOTE:
If you do not receive a confirmation tone, hang up, verify the codes entered
and repeat this procedure from Step 1. If you still do not receive a
confirmation tone, contact your system administrator for assistance.
Once you've enabled EC500, incoming calls placed to your office number ring on
your cell phone. Unanswered calls are sent to your preferred voice mail system.
31
Issue 4 May 2003