Avaya 4600 Series Installation Manual page 17

Requirements to Verify for Each IP Telephone
…
10. You have an extension number and an Avaya Communication Manager security code
(password) for each IP Telephone.
…
11. A Category 5e LAN jack is available at each phone site.
…
12. Electrical power is provided to each telephone by a Telephone Power Module (DC power
jack) (must be ordered separately), unless the 4602/4602SW/4606/4612/4620/4620SW/
4624/4630SW will be supplied by IEEE-standard power from the LAN, in which case no
power module is required.
The 4630 IP Telephone does not support IEEE-standard power, and therefore
requires the Power Module.
The 4690 IP Conference Telephone is powered with a special LAN/power cable
with a power interface module included with this phone.
…
13. 1 Category 5e modular line cord is available for the connection between the IP
Telephone and the PC.
…
14. Verify that the 4600 Series IP Telephone package includes the following components:
1 telephone set
1 AB1C handset or AK1A handset (for 4602/4602SW or 4620/4620SW IP
Telephones)
1 H4DU 9-foot long (when extended) 4-conductor coiled handset cord, plugged into
the telephone and the handset (except the 4690 IP Conference Telephone)
1 Category 5 modular line cord for the connection from the IP Telephone to the
Ethernet wall jack
4600 Series IP Telephone Safety Instructions (555-233-779)
Power Brick (4630 IP Telephones only)
Stylus (4630/4630SW IP Telephones only)
Power Interface Module (4690 IP Conference Telephone only)
Optional Items for Some IP Telephones
…
15. If applicable to your current installation, verify that the following equipment is present:
30A Switched Hub (applicable to the 4612/4624/4630 only)
4600 Series IP Telephone Installation
Pre-Installation Checklist
2-5