Ip Telephone Models; Software - Avaya 4600 Series Installation Manual

4600 Series IP Telephone Installation Guide

IP Telephone Models

There are eleven telephone set models defined in the 4600 Series IP Telephone family:
4602 IP Telephone
4602SW IP Telephone
4606 IP Telephone
4610SW IP Telephone
4612 IP Telephone
4620 IP Telephone
4620SW IP Telephone
4624 IP Telephone
4630 IP Telephone
4630SW IP Telephone
4690 IP Conference Telephone
Telephone models containing the SW designation have the same appearance, user interface, and
functionality as their non-SW counterparts, with one exception - the phones have an internal
Ethernet switch that allows the telephone and a PC to share the same LAN connection, if
appropriate; thus, SW models do not need (or work with) the 30A switched hub interface. The
exception to this exception is the 4620 - both the 4620 and 4620SW contain an Ethernet switch.
Additionally, the 4630SW IP Telephone differs from the 4630 IP Telephone in two distinct ways -
the 4630SW can be LAN-powered and is FCC and CISPR Class B, while the 4630 is a Class A
device that does not support LAN powering.
This document describes the installation of these phones. For details about using the features
provided by the phones, refer to the user documentation for each phone. For information about
desk or wall mounting any of 4600 IP Telephone Series, see the instructions boxed with the phone
or the Avaya support website.

Software

As shipped from the factory, the 4600 Series IP Telephones may not contain sufficient software for
registration and operation. When the phone is first plugged in, a software download from a TFTP
server is initiated. This gives the phone the functionality of an Avaya IP Telephone.
For downloads of software upgrades, the Avaya Media Server provides the capability for a remote
restart of the IP telephone. As a consequence of restarting, the phone automatically restarts
reboot procedures which result in a download, if new software is available.
Introduction
2-2
2
2