Restart The Telephone - Avaya 4600 Series Installation Manual

4600 Series IP Telephone Installation Guide
*
5. Press the key to terminate the procedure without restarting the telephone, otherwise, press #
and follow the Restart procedure directly below.

Restart the Telephone

Use the following procedure to restart the telephone.
1. While the phone is on-hook and idle, press the following sequence of keys on the faceplate of
the telephone:
Mute 7 3 7 3 8 # (Mute R E S E T #)
Press the Mute button momentarily. Do not press this button while pressing other
keys/buttons. The 4630/4630SW IP Telephones and the 4690 IP Conference
Telephone do not have a dedicated Hold button; for all other 4600 Series IP
Telephones, pressing the Hold button instead of the Mute button will also work.
The following text is displayed left-justified at the top of the display:
Reset values?
*=no #=yes
2. Press the # button to reset values to their defaults, or
If you press the # button, the following text is displayed left-justified at the top of the display
while the system values are reset to defaults:
Resetting
values.
Once the system values are reset, the following prompt is displayed:
Restart phone?
*=no #=yes
*
3. Press the key to terminate the procedure without restarting the telephone.
Press the # key to restart the telephone.
The remainder of the procedure depends on the status of the boot and application files.
Refer to Appendix
Restart the Telephone
3-14
A.
*
to continue.
3