Boot File Needs To Be Upgraded - Avaya 4600 Series Installation Manual

4600 Series IP Telephone Installation Guide
*
3. Press the key to terminate the procedure without restarting the telephone.
Press the # key to restart the telephone.
The remainder of the procedure depends on the status of the boot and application files.
Refer to the table below.
If this condition applies

Boot File Needs to be Upgraded

Latest Boot File Loaded/No Application File or Application File Needs to
be Upgraded
Latest Boot File and System-Specific Application File Already Loaded
Boot File Needs to be Upgraded
This should almost never happen.
1. The following message is displayed:
Restarting...
2. While the hardware is being initialized, the following message is displayed:
Initializing
3. While either the application file (if there is one) or the boot code is uncompressed into RAM,
the following message is displayed:
Loading
....************
Since this takes a while, asterisks, then periods, then asterisks are displayed on the second
line to indicate that something is happening.
4. When control is passed to the software that was just loaded, the following message is
displayed:
Starting...
Scenarios for the Restart Process
A-2
See
page A-2
page A-5
page A-6
4