POSIFLEX LM-2010 User Manual

POSIFLEX LM-2010 User Manual

Hide thumbs Also See for LM-2010:

Advertisement

LM-2010 / 2110

LCD Monitor

User's Manual
I.
FEATURES
• Light weight and high luminance LCD monitor for industrial and
commercial use
• Application covers POS, POIS (Kiosk), factory Automation etc.
• High quality 10.4" TFT LCD panel with scaling up function for full screen
display
• Supports display resolution up to 800 x 600 pixels
• Tilt adjustable construction
• Spill proof and easy maintenance structure allowing easy cleaning
FCC NOTICE
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions manual, may cause interference to radio
communications. It has been tested and found to comply with limits for a Class A digital device
pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection
against interference when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own expense will be
required to take whatever measures to correct the interference.
WARRANTY LIMITS
Warranty will terminate automatically when the machine is opened by any person other
than the authorized technicians. The user should consult his/her dealer for the problem happened.
Warranty voids if the user does not follow the instructions in application of this merchandise. The
manufacturer is by no means responsible for any damage or hazard caused by improper application.
ABOUT THIS MANUAL
This manual assists the user to utilize the LCD Monitor LM-2010/2110 series. This
series is a 10.4" LCD monitor of long endurance industrial standards. The LM-2010 is a upgrade
kit particularly designed for Posiflex hybrid terminal HT series host system.
The manufacturer of the LM-2010/2110 series heartily apologizes to the user for
reserving the right to change or to modify this manual without notice due to the rapid and constant
progress and improvement on science and technology. The user may always obtain the most up to
date
information
through
//www.posiflex.com, http://www.posiflexusa.com.
TRADE MARKS AND SERVICE MARKS
POSIFLEX is a registered trademark of Posiflex Inc..
Other brand and product names are trademarks and registered trademarks and service marks
of their respective owners.
P/N: 19670900010
Rev. Original
any
of
our
web sites:
 Copyright Posiflex Inc. 2006
http://www.posiflex.com.tw,
http:
Part 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LM-2010 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for POSIFLEX LM-2010

  • Page 1: Lcd Monitor

    This manual assists the user to utilize the LCD Monitor LM-2010/2110 series. This series is a 10.4” LCD monitor of long endurance industrial standards. The LM-2010 is a upgrade kit particularly designed for Posiflex hybrid terminal HT series host system.
  • Page 2: Model Numbers

    Insert the power adaptor to the wall socket and the LM-2110 is ready for work. 3. For LM-2010, following actions shall be taken to install it onto HT systems with power for HT systems disconnected and also reference of the manuals of the HT systems.
  • Page 3 ON whenever power is made available from the HT system. Use 4 fixing screws to fit the bottom of LM-2010 supporting bracket to HT system base top as arrowed in the right picture and have the VGA cable pass through the VGA cable hole as circled in the same picture.
  • Page 4 V. OSD OSD buttons “OSD” button: To enter OSD setup menu, or to perform function selected in OSD operation. “NXT” button: To go to next option function. “” “” button: To increase setting. “” “” button: To decrease setting. “” “”...
  • Page 5 “BRIGHTNESS ADJUST”: When this item is selected, there will be only the brightness icon with an adjustment indication bar under it between the main menu area and the video signal mode. Press “+” button to increase brightness. Press “-” to decrease. Press “OSD” button to save the current setting and return to “Brightness/Contrast submenu”.
  • Page 6 Press “OSD” button to save the current setting and return to “Color balance adjust submenu”. “4200K”: Pressing “OSD” button on this icon will set the color balance to a color temperature of 4200 degrees Kelvin. “5000K”: Pressing “OSD” button on this icon will set the color balance to a color temperature of 5000 degrees Kelvin.
  • Page 7 “OSD” button to save the current setting and return to “Geometry adjust submenu”. “VERTICAL POSITION”: When this item is selected, there will be only the vertical position icon with an adjustment indication bar under it between the main menu area and the video signal mode. Press “+”...
  • Page 8: Supported Display Modes

    the video signal mode. Press “+” button to increase smoothness of display (decrease sharpness). Press “-” to go the other way. Press “OSD” button to save the current setting and return to “OSD submenu”. “MODE SELECT”: Pressing “OSD” button on this icon will have no effect at all if the display mode is not one of the confusing modes.
  • Page 9 Part 9...
  • Page 10 T31454 Ä µ § i ¨ Ï ¥ Î ª Ì ³ o ¬ O ¥ Ò Ã þ ª º ¸ ê ° T ² £ « ~ ¡ A ¦ b © ~ ¦ í ª º À ô ¹...

This manual is also suitable for:

Lm-2110

Table of Contents