Webcall Config - Planet VIP-320 User Manual

Gateway IP
Name
Call
Stop

WebCall Config

This page let you define the welcome message, LOGO, call number when using Web Call function.
Web Call accept List:
Define the display name on select option during Web call.
Name
Number
Delete
Stop
To add new name item on Web Call accept List, please assign the number you want to insert before,
input list item NAME then press ADD button to add it on the list. Then modify the necessary information
on the r Web Call accept List.
Please remember to press the "Modify" button to take it effect. For store back to flash memory, please
press "Save Modification" (Plaase refer to the "Syetem Maintenance
BWelcome page and banner Upload:
Define the welcome message and Logo for Web Call function:
User HTML Welcome
Page
User Welcome page
banner
Parameter Description
Show the IP of this VoIP router
Select the name you want to make connect, this is defined on Web Call
page. (Please refer to the "VoIP Config
call).
Press to make a call.
Stop the call.
Parameter Description
Name of selectable item during web call.
Number of this selected item call out, when user select the name of this
item rule, the number here will be used as the number for VoIP call In,
and will check with the area code define on "VoIP Config
Routing VoIP Call In", that mean you should have a matched item
defined on "VoIP Config
Delete this rule item on routing table.
Stop the call.
Parameter Description
To upload a welcome message HTML file for display on Web Call
function page, this page should be HTML file and there is a file size
limitation, please press the "Browse" button to select the HTML file you
want to upload and press "Upload" to Upload it.
To upload a logo graphic file for display on Web Call function page, this
graphic file should be name as "Welcome" only and there is no ext file
Web Call Setting
Call Routing VoIP Call Out".
Save Modification").
Web
Call
32