Table of Contents
Advertisement
BS setting
Base setting is using for factory mode, after modify BS setting, please
restart the base!
Factory default PIN is 1590
Press
/
button to select [BS setting]. Press
confirm and the display will show [PIN: ]
Enter the four digits base PIN. (factory default PIN is 1590)
MASTER mode
1.1 Press
button to select [ 1 L Count 3 ]
Press
and
Press
and
Press
and
This setting for use PSTN / SKYPE / Group Calls
Please DO NOT change factory default value, the DCT-100 may
become annulment!
1.2 Press
button to select [ 2 CALLWAIT Y]
Press
and
Press
and
This setting is for use call waiting.
Please DO NOT change factory default value, the DCT-100 may
become annulment!
1.3 Press
button to select [3.HS VOL3 HS]
This setting is to adjust local handset speaker volume.
Please DO NOT change factory default value, the DCT-100 may
become annulment!
1.4 Press
button to select [4 FAR VOL 7]
This setting is to adjust remote handset speaker volume.
Please DO NOT change factory default value, the DCT-100 may
button to 1L Count 1
button to 1L Count 2
button to 1L Count 3
button to 2 CALLWAIT Y
button to 2 CALLWAIT N
button to
default
default
/
HS setting
>BS setting
PIN:
MASTER:?
1 L Count 3
2 CALLWAIT Y
3.HS VOL3 HS
4 FAR VOL
44
Advertisement
Table of Contents
