Table of Contents
Advertisement
Profile
Delete
To add new rule item on routing table, please assign the item number you want to insert before, input
AREA CODE and IP address then press ADD button to add it on the list. Then modify the necessary
information on the routing table list.
Please remember to press the modify button to take it effect. For store back to flash memory, please
press "Syetem Maintenance
Hint
VoIP Call In
This page let you define the routing rule for Call in from VoIP. (VoIP router got a VoIP call required form
network, and then translates the phone number passed from remote side VoIP router to the real dial out
number, and line base on this VoIP call in routing table). Each time when the VoIP router received a
VoIP call from network, it will check with "Area Code" to see which rule matched to service, if no rule
matched, it will refuse to call out and will bound back the call.
When the VoIP router received a VoIP called from network, it will check below rules fields then decide
line and number to dial out.
number will be 0,22199518 ( ", " mean wait 1 second).
This example is especially for speed dial function.
Define the optional special call out parameters on this destination.
Please input the name you Udefined on the profile (Please refer to the
"VoIP Config
Delete this rule item on routing table.
Save Modification" .
When user enable the hot line function on "VoIP Config
Line Configure
above parameters and direct call out by hot line call out
rule.
Routing Setup
Line Setting" menu, it will over ride the
Routing Profile") list.
24
Advertisement
Table of Contents
