SmartNode 4552 & 4562 Getting Started Guide
Introduction
The factory configuration settings for SmartNode 4552 & 4562 are as follows:
#----------------------------------------------------------------#
#
# 4552 & 4562
# R3.xx BUILDxxxxx SIP
# 2005-08-25T00:00:00
# Factory configuration file
#
#----------------------------------------------------------------#
gui type basic
dns-relay
webserver port 80 language en
sntp-client
sntp-client server primary 129.132.2.21 port 123 version 4
profile acl ACL_WAN_PERMIT_ALL_MGMT
permit 1 ip any any
profile acl ACL_WAN_PERMIT_SEL_MGMT
deny 1 tcp any any eq 23
deny 2 tcp any any eq 80
deny 3 udp any any eq 161
permit 4 ip any any
profile acl ACL_WAN_BLOCK_ALL_MGMT
Introduction
E • SmartNode 4552 & 4562 factory configuration
#
#
#
#
#
#
54