Radio And Tv Interference; Ce Notice; Isdn Compliance - Patton electronics SmartNode 4552 Getting Started Manual

SmartNode 4552 & 4562 Getting Started Guide

Radio and TV interference

The SmartNode router generates and uses radio frequency energy, and if not installed and used properly-that
is, in strict accordance with the manufacturer's instructions-may cause interference to radio and television
reception. The SmartNode router have been tested and found to comply with the limits for a Class B comput-
ing device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to pro-
vide reasonable protection from such interference in a commercial installation. However, there is no guarantee
that interference will not occur in a particular installation. If the SmartNode router does cause interference to
radio or television reception, which can be determined by disconnecting the unit, the user is encouraged to try
to correct the interference by one or more of the following measures: moving the computing equipment away
from the receiver, re-orienting the receiving antenna and/or plugging the receiving equipment into a different
AC outlet (such that the computing equipment and receiver are on different branches).

CE notice

We certify that the apparatus identified in this document conforms to the requirements of Council Directive
1999/5/EC on the approximation of the laws of the member states relating to Radio and Telecommunication
Terminal Equipment and the mutual recognition of their conformity.

ISDN compliance

The device identified in this document is approved for connection to the public ISDN telecommunication
network over a BRI/So interface.
Radio and TV interference
Disconnect all power before servicing.
The SmartNode router contains no user serviceable parts.
The mains outlet that is utilized to power the equipment must be
within 10 feet (3 meters) of the device and shall be easily acces-
sible.
A • Compliance information
41