Settings Screen - Trane CGAM Installation & Operation Manual

Settings Screen

The Settings screen provides a user the ability to adjust settings necessary to support daily tasks.
The layout provides a list of sub-menus, organized by typical subsystem. This organization allows
each subscreen to be shorter in length which should improve the user's navigation.
A sample Settings screen is a list of the subsystems as shown below.
Settings Sub-Screens - Table of Text, Data, Ranges, etc.
Below is the table of text, resolution, field size, enumerated selections, and data for Settings
subscreens. See the functional specification "CGAM Settings and Setpoints" for further
information such as ranges and operation.
Table 41. Unit
Description
Front Panel Cool
Front Panel Chilled Water Setpt:
Auxiliary Chilled Water Setpt:
Front Panel Demand Limit Setpt:
Front Panel Ice Build Cmd:
Front Panel Ice Term Setpt:
Front Panel Noise Stb Cmd:
Setpoint Source:
Table 42. Feature Settings
Description
Power-Up Start Delay:
Cool Low Ambient Lockout:
Cool Low Ambient Lockout Stpt:
Water Pump Off Delay:
Ice Building:
PHR Fan Control:
CG-SVX17D-EN
Resolution or (Enumerations)
Cool
+ or - XXX.X
+ or - XXX.X
XXX
On/Auto
+ or - XXX.X
On/Auto
(BAS/Ext/FP, Ext/ Front Panel, Front
Panel), BAS/Ext/FP
Resolution or (Enumerations),
Default
10 seconds
(Enable, Disable), Enable
+ or - XXX.X
1 minute
(Enable, Disable), Disable
(Enable, Disable), Disable
Controls Interface
Units
Enum
Temperature
Temperature
Percent
Enum
Temperature
Enum
Enum
Units
Seconds (MM:SS)
Enum
Temperature
Minutes (HH:MM)
Enum
Enum
113