Dynaview Interface - Trane CGAM Installation & Operation Manual

DynaView Interface

The DynaView enclosure design is weatherproof and made of durable plastic for use as a device
on the outside of the unit.
The display on DynaView is a 1/4 VGA display with a resistive touch screen and an LED backlight.
The display area is approximately 4 inches wide by 3 inches high (102mm x 60mm).
Key Functions
In this touch screen application, key functions are determined completely by software and change
depending upon the subject matter currently being displayed. The basic touch screen functions are
outlined below.
Radio Buttons
Radio buttons show one menu choice among two or more alternatives, all visible. The radio button
model mimics the buttons used on old-fashioned radios to select stations. When one is pressed,
the one that was previously pressed "pops out" and the new station is selected. In the DynaView
model the possible selections are each associated with a button. The selected button is darkened,
presented in reverse video to indicate it is the selected choice. The full range of possible choices
as well as the current choice is always in view.
Spin Value Buttons
Spin values are used to allow a variable setpoint to be changed, such as leaving water setpoint. The
value increases or decreases by touching the increment (+) or decrement (-) arrows.
Action Buttons
Action buttons appear temporarily and provide the user with a choice such as Enter or Cancel.
Hot Links
Hot links are used to navigate from one view to another view.
File Folder Tabs
File folder tabs are used to select a screen of data. Just like tabs in a file folder, these serve to title
the folder/screen selected, as well as provide navigation to other screens. In DynaView, the tabs are
in one row across the top of the display. The folder tabs are separated from the rest of the display
by a horizontal line. Vertical lines separate the tabs from each other. The folder that is selected has
no horizontal line under its tab, thereby making it look like a part of the current folder (as would
an open folder in a file cabinet). The user selects a screen of information by touching the
appropriate tab.
CG-SVX17D-EN
Controls Interface
107