Trane CGAM Installation & Operation Manual page 125

Controls Interface
This screen will display for 3-10 seconds. This screen will give the status of the Application
software, the Boot Software P/N, display Self Test results and display the Application Part Number
(CGAM 6200-0450-01). The contrast will also be adjustable from this screen. The message "Selftest
Passed" may be replaced with "Err2: RAM Error" or "Err3: CRC Failure"
Display Formats
Temperature settings can be expressed in F or C, depending on Display Units settings.
Pressure settings can be expressed in psia, psig, kPaa (kPa absolute), or kPag (kPa gauge)
depending on Display Units settings.
Dashes ("-----") appearing in a temperature or pressure report, indicates that the value is invalid
or not applicable.
Languages
The languages for DynaView will reside in the main processor. The main processor will hold three
languages, English, and two alternate languages. The service tool (TechView) will load the main
processor with user selected languages from a list of available translations.
CG-SVX17D-EN 125