Wisp Mode; Pc Configuration; Connect To Network - TP-Link TL-MR3020 User Manual

Note:
After the rebooting, please reconnect to the network according to
Wireless Security is enabled, you need to enter the password you've just set to successfully
finish the connecting.

3.2 WISP Mode

The default IP address of the Portable 3G/3.75G Wireless N Router is 192.168.0.254 and the
default Subnet Mask is 255.255.255.0. These values can be changed as you desire. In this
guide, we all use the default values for description.
3.2.1

PC configuration

Here we take Wireless Network Connection as an example. (You can also go to Local Area
Connection to configure the PC for wired network connection, and then configure the router. If
you need instructions as to how to do this, please refer to
1. For Windows XP, please go to Start → Settings → Control Panel → Network and
Internet Connections → Network Connections; for Windows 7, please go to Start →
Settings → Control Panel → View network status and tasks → Manage network
connection. Right click Wireless Network Connection, and select Properties.
2. For Windows XP, double click Internet Protocol (TCP/IP) in the item list; for Windows 7,
double click Internet Protocol Version 4 (TCP/IPv4).
3. Select "Obtain an IP address automatically" and "Obtain DNS server address
automatically". Click OK to finish the settings.
3.2.2

Connect to Network

1. Click the icon at the bottom of your desktop.
2. Click "Refresh network list", and then select the network. Click Connect.
Note:
The default SSID of the network is TP-LINK_POCKET_3020_xxxxxx. (The xxxxxx is the last six
characters of the router's MAC address.)
TL-MR3020
Figure 3-8 Quick Setup – Finish
-14-
Portable 3G/3.75G Wireless N Router
3.1.2 Connect to
Appendix B: "Configuring the
Network. If
PC.")