Wps - TP-Link TL-MR3020 User Manual

Portable 3g/3.75g wireless n router
Hide thumbs Also See for TL-MR3020:
Table of Contents

Advertisement

4.4 WPS

This section will guide you add a new wireless device to an existing network quickly by WPS
(Wi-Fi Protected Setup) function.
a).
Choose menu "WPS", and you will see the next screen (shown in Figure 4-2 ).
WPS Status - Enable or disable the WPS function here.
Current PIN - The current value of the Router's PIN displayed here. The default PIN of the
Router can be found in the label or User Guide.
Restore PIN - Restore the PIN of the Router to its default.
Gen New PIN - Click this button, and then you can get a new random value for the
Router's PIN. You can ensure the network security by generating a new PIN.
Add device - You can add the new device to the existing network manually by clicking this
button.
b).
To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and Router using either Push Button Configuration (PBC)
method or PIN method.
Note:
To build a successful connection by WPS, you should also do the corresponding configuration
of the new device for WPS function meanwhile.
For the configuration of the new device, here takes the Wireless Adapter of our company for
example.
I.
By PBC
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)
method, you can add it to the network by PBC with the following two methods.
Method One:
Step 1: Press the WPS button on the front panel of the Router for less than 5 seconds.
TL-MR3020
Portable 3G/3.75G Wireless N Router
Figure 4-2 WPS
-29-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents