Static Routing List - TP-Link TL-MR3020 User Manual

5.12.1 Static Routing List

Choose menu "Advanced Routing → Static Routing List", and then you can configure the
static route in the next screen (shown in Figure 5-62). A static route is a pre-determined path
that network information must travel to reach a specific host or network.
To add static routing entries:
1. Click Add New... shown in Figure 5-63, you will see the following screen.
2. Enter the following data:
Destination Network - The Destination Network is the address of the network or host
that you want to assign to a static route.
Subnet Mask - The Subnet Mask determines which portion of an IP Address is the
network portion, and which portion is the host portion.
Default Gateway - This is the IP Address of the gateway device that allows for contact
between the Router and the network or host.
3. Select Enabled or Disabled for this entry on the Status drop-down list.
4. Click the Save button to make the entry take effect.
Other configurations for the entries:
TL-MR3020
Figure 5-62 Static Routing
Figure 5-63 Add or Modify a Static Route Entry
-172-
Portable 3G/3.75G Wireless N Router