TP-Link TL-MR3020 User Manual page 127

The WPS Configuration Screen of Wireless Adapter
Method Three:
Step 1. Click the Enable WPS button in Figure 5-2 , and then click Add device; the following
screen will appear.
Step 2. Choose Press the button of the new device in two minutes and click Connect.
Step 3. For the configuration of the wireless adapter, please choose Push the button on my
access point in the configuration utility of the WPS as below, and click Next.
TL-MR3020
Figure 5-3 Add A New Device
-117-
Portable 3G/3.75G Wireless N Router