TP-Link TL-MR3020 User Manual page 42

The WPS Configuration Screen of Wireless Adapter
Method Three:
Step 1: Click the Enable WPS button in Figure 4-2 , and then click Add device; the following
screen will appear.
Step 2: Choose Press the button of the new device in two minutes and click Connect.
Step 3: For the configuration of the wireless adapter, please choose Push the button on my
access point in the configuration utility of the WPS as below, and click Next.
TL-MR3020
Figure 4-3 Add A New Device
-32-
Portable 3G/3.75G Wireless N Router