TP-Link TL-MR3020 User Manual page 53

Portable 3g/3.75g wireless n router
Hide thumbs Also See for TL-MR3020:
Table of Contents

Advertisement

This page displays the WAN IP parameters assigned dynamically by your ISP, including IP
address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP
parameters from your ISP. Click the Release button to release the IP parameters.
MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU Size
unless required by your ISP.
Use These DNS Servers - If your ISP gives you one or two DNS addresses, select Use
These DNS Servers and enter the primary and secondary addresses into the correct fields.
Otherwise, the DNS servers will be assigned dynamically from your ISP.
Note:
If you get Address not found error when you access a Web site,
servers are set up improperly. You should contact your ISP to get DNS server addresses.
Host Name - This option specifies the Host Name of the Router.
Get IP with Unicast DHCP - A few ISPs' DHCP servers do not support the broadcast
applications. If you cannot get the IP Address normally, you can choose this option. (It is
rarely required.)
2. If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting,
select Static IP. The Static IP settings page will appear, shown in Figure 4-13.
IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.
TL-MR3020
Figure 4-13 WAN - Static IP
-43-
Portable 3G/3.75G Wireless N Router
it is likely that your DNS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents