The WPS Configuration Screen of Wireless Adapter
Step 4:
Wait for a while until the next screen appears. Click Finish to complete the WPS
configuration.
The WPS Configuration Screen of Wireless Adapter
II. By PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the
network by PIN with the following two methods.
Method One: Enter the PIN into my Router
Step 1: Click the Enable WPS button in Figure 4-2 , and then click Add device; the following
TL-MR3020
Portable 3G/3.75G Wireless N Router
-33-