TP-Link TL-MR3020 User Manual page 32

Region - Select your region from the pull-down list. This field specifies the region
where the wireless function of the Router can be used. It may be illegal to use the
wireless function of the Router in a region other than one of those specified in this
filed. If your country or region is not listed, please contact your local government
agency for assistance.
Channel - This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference
problems with another nearby access point. If you select auto, then the AP will
select the best channel automatically.
If you choose Repeater, the next screen will appear as shown in Figure 3-24. In Repeater
mode, the AP with WDS disabled will relays data to an associated root AP. AP function is
enabled meanwhile. The wireless repeater relays signal between its stations and the root
AP for greater wireless range.
Name of remote AP (SSID) - Enter the name of a remote AP (also called the
SSID) that you want to access. Click the Survey button behind it, you can choose
one of searching results to fill in this field.
MAC Address - Enter the MAC address of AP that you want to access. When you
use the survey function to fulfill the Name of remote AP (SSID), this field will be
filled in automatically.
TL-MR3020
Figure 3-24 Quick Setup – Repeater
-22-
Portable 3G/3.75G Wireless N Router