System Routing Table; Bandwidth Control - TP-Link TL-MR3020 User Manual

4. Click the Save button to make the entry take effect.
Other configurations for the entries:
Click the Delete button to delete the entry.
Click the Enable All button to enable all the entries.
Click the Disable All button to disable all the entries.
Click the Delete All button to delete all the entries.
Click the Previous button to view the information in the previous screen, click the Next button
to view the information in the next screen.

4.12.2 System Routing Table

Choose menu "Advanced Routing → System Routing Table", you can configure the system
routing table in the next screen (shown in Figure 4-69). System routing table views all of the
valid route entries in use.
Destination Network - The Destination Network is the address of the network or host to
which the static route is assigned.
Subnet Mask - The Subnet Mask determines which portion of an IP address is the network
portion, and which portion is the host portion.
Gateway - This is the IP address of the gateway device that allows for contact between the
Router and the network or host.
Interface - This interface tells you whether the Destination IP Address is on the LAN &
WLAN (internal wired and wireless networks), the WAN (Internet).

4.13 Bandwidth Control

Figure 4-70 Bandwidth Control
TL-MR3020
Figure 4-69 System Routing Table
-93-
Portable 3G/3.75G Wireless N Router