Ap Bridge-Wds Mode - Draytek VigorAP 700 User Manual

After you finish with setting, please click Apply, and the following screen will be displayed:
When you see this message, the settings you made is successfully save. You can click Continue
to return to previous page and continue on other setting items, or click Apply button to restart
the VigorAP 700. The changes will take effect after about 30 seconds.

2-4-5 AP Bridge-WDS Mode

In this mode, this VigorAP 700 will connect to up to four VigorAP 700s which uses the same
mode, and all wired Ethernet clients of every VigorAP 700s will be connected together. You can
use this mode to connect a network to other networks which is physically isolated.
When you use this mode, this access point is still able to accept wireless clients.
When you select AP Bridge-WDS, the following screen will be displayed:
Here are descriptions of every setup item:
VigorAP 700 User's Guide
26