Draytek VigorAP 700 User Manual page 26

Main SSID
Multiple SSID
Channel
Associated Clients
After you finish with setting, please click Apply, and the following screen will be displayed:
When you see this message, the settings you made is successfully save. You can click Continue
to return to previous page and continue on other setting items, or click Apply button to restart
the VigorAP 700. The changes will take effect after about 30 seconds.
VigorAP 700 User's Guide
and 802.11g band will be able to connect to this access point.
If you want to allow 802.11b, 802.11g, and 802.11 n clients to
connect to this access point, select 2.4GHz (B+G+N).
Please input the SSID (the name used to identify this VigorAP 700)
here. You can input up to 32 alphanumerical characters. PLEASE
NOTE THAT SSID IS CASE SENSITIVE.
The access point supports multiple SSID function; up to four SSIDs
can be set. If you want to configure additional SSIDs, please click this
button. For detailed descriptions of the function, please refer to
Section 2-4-1-1.
Please select a channel number you wish to use. If you know a certain
channel number is used by other VigorAP 700s nearby, please refrain
from using the same channel number.
Click Show Active Clients button and a new popup window will
appear which contains the information about all wireless clients
connected to this access point. You can click Refresh button in popup
window to keep information up-to-date.
18