802.1X Authentication - Draytek VigorAP 700 User Manual

RADIUS Server Port
RADIUS Server
Password
After you finish with setting, please click Apply, and the following screen will be displayed:
When you see this message, the settings you made is successfully save. You can click Continue
to return to previous page and continue on other setting items, or click Apply button to restart
the VigorAP 700. The changes will take effect after about 30 seconds.

2-7-5 802.1x Authentication

You can enable 802.1x user identification (based on RADIUS user authentication server) by
checking Enable 802.1x Authentication box when you select Disable or WEP as encryption
type, and the following screen will be displayed:
Here are descriptions of every setup item:
Enable 802.1x
Authentication
After you finish with setting, please click Apply, and the following screen will be displayed:
Please input the port number of RADIUS authentication server here.
Default value is 1812.
Please input the password of RADIUS authentication server here.
Enable or disable the use of 802.1x user authentication.
41
VigorAP 700 User's Guide