Draytek VigorAP 700 User Manual page 39

Here are descriptions of every setup item:
Enable WPS
Wi-Fi Protected Setup
Information
Check this box to enable or disable WPS function.
All information related to WPS will be displayed here. They're
helpful when you're setting up connections by WPS.
WPS Status: Displays WPS status. If data encryption settings of this
access point has never been set, 'unConfigured' message will be
displayed her (see Section 2-7 for detailed information); if data
encryption settings has been set before, 'Configured' message will
be displayed here.
Self PinCode: This is the WPS PIN code of this access point. This
code is useful when you need to build wireless connection by WPS
with other WPS-enabled wireless devices.
SSID: Displays the SSID (SSID) of this access point.
Authentication Mode: The wireless security authentication mode of
this access point will be displayed here. If you don't enable security
function of the access point before WPS is activated, the access
point will auto set the security to WPA (AES) and generate a set of
passphrase key for WPS connection.
Passphrase Key: Displays the WPA passphrase here, all characters
will be replaced by asterisk for security reason. If encryption is not
31
VigorAP 700 User's Guide