Station-Infrastructure - Draytek VigorAP 700 User Manual

VLAN ID
(0:Untagged)

2-4-2 Station-Infrastructure

In this mode, you can connect the access point to Ethernet device such as TV and Game player
to enable the Ethernet device as a wireless station and join to a wireless network through an
access point or AP router.
Here are descriptions of every setup item:
Band
VigorAP 700 User's Guide
instant responding. Therefore you can improve the performance of
such network applications.
If your network uses VLANs, you can assign the SSID to a VLAN
on your network. Client devices that associate using the SSID are
grouped into this VLAN. The VLAN ID range is from 1 to 4094.
The VLAN ID is 0 by default, it means disabling the VLAN
function for the SSID.
Please select the wireless band you wish to use. By selecting
different band setting, you'll be able to allow or deny the wireless
client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless
clients using the wireless band you select (802.11b, 802.11n, or
802.11g) will be able to connect to this access point.
If you select 2.4GHz (B+G), then only wireless clients using
802.11b and 802.11g band will be able to connect to this access
point.
If you want to allow 802.11b, 802.11g, and 802.11n clients to
20