Ap Bridge-Wds Mode - Draytek VigorAP 700 User Manual

2-4-5 AP Bridge-WDS Mode

In this mode, this VigorAP 700 will connect to up to four VigorAP 700s which uses the same
mode, and all wired Ethernet clients of every VigorAP 700s will be connected together. You can
use this mode to connect a network to other networks which is physically isolated.
When you use this mode, this access point is still able to accept wireless clients.
When you select AP Bridge-WDS, the following screen will be displayed:
Here are descriptions of every setup item:
Band Please select the wireless band you wish to use. By selecting
different band setting, you'll be able to allow or deny the wireless
client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless
clients using the wireless band you select (802.11b, 802.11n, or
802.11g) will be able to connect to this access point.
If you select 2.4GHz (B+G), then only wireless clients using
802.11b and 802.11g band will be able to connect to this access
point.
27
VigorAP 700 User's Guide