Universal Repeater - Draytek VigorAP 700 User Manual

When you see this message, the settings you made is successfully save. You can click Continue
to return to previous page and continue on other setting items, or click Apply button to restart
the VigorAP 700. The changes will take effect after about 30 seconds.

2-4-6 Universal Repeater

In this mode, the access point can act as a wireless repeater; it can be Station and AP at the
same time. It can use Station function to connect to a Root AP and use AP function to service all
wireless stations within its coverage.
Note: For Repeater Mode, this access point will demodulate the received signal, check if
this signal is noise for the operating network then have the signal modulated and amplified
again. The output power of this mode is the same as that of WDS and normal AP mode.
Here are descriptions of every setup item:
Band
VigorAP 700 User's Guide
Please select the wireless band you wish to use. By selecting
different band setting, you'll be able to allow or deny the wireless
28