View System Status And Information - Draytek VigorAP 700 User Manual

NOTE: If you can't see the web management interface, and you're prompted to input user
name and password again, it means you don't input username and password correctly. Please
retype user name and password again. If you're certain about the user name and password
you type are correct, please go to 4-2 Troubleshooting to perform a factory reset, to set the
password back to default value.

2-3 View System Status and Information

After you connected to the access point by web browser, the first page you will see is Status
and Information. All system and network related information of this access point will be
displayed here. The information is very helpful when you want to know the detailed
information of your access point, and when you try to fix the communication problem between
this access point and other wired / wireless computer / devices.
You can click Home on the left, and the system status and information will be displayed, as
shown below:
VigorAP 700 User's Guide
14