Draytek VigorAP 700 User Manual page 29

Main SSID
Site Survey
After you finish with setting, please click Apply, and the following screen will be displayed:
When you see this message, the settings you made is successfully save. You can click Continue
to return to previous page and continue on other setting items, or click Apply button to restart
the VigorAP 700. The changes will take effect after about 30 seconds.
2-4-2-1 Wireless Site Survey
The table will list the access points nearby as the access point is set to Station mode. You can
select one of the access points to associate.
connect to this access point, select 2.4GHz (B+G+N).
Please input the SSID (the name used to identify this VigorAP 700)
here. You can input up to 32 alphanumerical characters. PLEASE
NOTE THAT SSID IS CASE SENSITIVE.
When you use this access point as a wireless station for Ethernet
network device to have wireless capability, you have to associate it
with a working access point. Click Select Site Survey button, then a
Wireless Site Survey Table will pop up. It will list all available
access points nearby. You can select one access point in the table. It
will join wireless LAN through this access point. Please go to
Section 2-4-2-1 for more information about the Wireless Site
Survey Table.
21
VigorAP 700 User's Guide