Draytek VigorAP 700 User Manual page 30

Here are descriptions of every setup item:
Select
Channel
SSID
BSSID
Encryption
Authentication
Signal
Band
Refresh
Connect
VigorAP 700 User's Guide
Click the radio button to select the access point.
Display the channel number of the access point.
Display the SSID name of the access point.
Display the BSSID (MAC Address) of the access point.
Display the encryption setting of the access points. If you have
selected the access point with security setting, you have to go to 2-7
Wireless Security to set the same security with the access point you
want to associate.
Display the authentication type of the access point.
The signal strength of each access point will be displayed here. The
signal strength is stronger, the connection quality is better.
Display the wireless modes including 11b, 11b/g or 11b/g/n or 11n
only of the access points.
Click this button to refresh the table.
Select an access point and click this button to choose the network.
The SSID name of the access point you have selected will be
displayed in the Main SSID in the Basic Setting page.
22