Glass Cleaning - Dimplex DFB8842 Owner's Manual

2. Filter can be accessed
from the top rear of the
unit (Figure 9).
3. Grasp filter and slide filter
straight up.
4. Replace or clean filter.
!
NOTE: If after market air
filter is used ensure it is
installed according to the
manufacturer's
recommended instructions.

Glass Cleaning

The glass is cleaned in the
factory during the assembly
operation. During shipment,
installation, handling, etc., the clear door may collect dust particles,
these can be removed by dusting lightly with a clean dry cloth.
To remove fingerprints or other marks, the clear door can be cleaned
with a damp cloth. The clear door should be completely dried with a
lint free cloth to prevent water spots. To prevent scratching, do not use
abrasive cleaners or spray liquids on the clear door surface.
Fireplace Surface Cleaning
Use warm water only to clean painted surfaces. Do not use abrasive
cleaners on glass surface or spray liquids directly onto any surface.
Figure 9
Purifire™
Filter
17