Fireplace Installation - Dimplex DFB8842 Owner's Manual

CAUTION:
is provided by six (6) rubber feet. Do not install the fireplace
insert directly on carpet or similar surfaces which may restrict
air circulation. If installing the fireplace in a carpeted area, place a
one-piece, solid, flat surface under the fireplace insert. Ensure that
all six of the insert's feet rest securely on this
WARNING: Ensure the power cord is not installed so that it is
pinched or against a sharp edge and ensure that the power cord is
stored or secured to avoid tripping or snagging to reduce the risk of
fire, electric shock or injury to persons.
Construction and electrical outlet wiring must comply with local
building codes and other applicable regulations to reduce the risk of
fire, electric shock and injury to persons.
Do not attempt to wire your own new outlets or circuits. To reduce
the risk of fire, electric shock or injury to persons, always use a
licensed electrician.

Fireplace Installation

For dimensions of the firebox insert, with and without the trim, refer to
Figure 2. The fireplace does not require any additional venting.
Figure 2
31 ⅜" (797 mm)
30 ¼" (768 mm)
Clearance for air circulation beneath the fireplace insert
surface.
26 ⅜"
(670
mm)
25 ½"
(648
mm)
7
10 ½"
(267 mm)