Dimplex DFB8842 Owner's Manual page 15

Figure 7
Upper light Bracket
lower Bulbs
4. Slide glass to right side of fireplace to remove (Figure 7).
5. Pull the front edge of the plastic Log Set or plastic grate up and
forward until the rear tab releases from the ledge located at the
bottom of the mirror (Figure 8).
!
IMPORTANT: Only handle the log Set Assembly by the Ember
Bed or plastic grate.
!
NOTE: log Set Assembly fits tightly into firebox, some force
may be necessary to remove.
6. Set log Set Assembly in front
of fireplace.
7. Unscrew bulbs counter clockwise.
8. Insert new bulbs and screw in
clockwise.
9. Install the log Set Assembly by
placing the front, bottom edge of
the Ember Bed in the track
behind the control panel. Once in
place, push down on the back
Upper Bulbs
log Set Assembly
Figure 8
Back
Ledge
Rear
Tab
15
Front Glass
Trim
Log
Ember Bed
Side Section
Front
Edge