Dimplex DFB8842 Owner's Manual page 13

!
NOTE: When using the remote control the heater runs on a
thermostat. Press the J. Temperature Up or I. Temperature
Down buttons to adjust the set temperature. Once the desired set
temperature is reached the heater will turn off. The heater will cycle
on and off to maintain the desired set temperature.
Child Lock (Figure 6)
1. Depress tab on the
battery cover on the
back of the remote
transmitter and remove
the battery cover.
2. Move Child lock tab to
the right to lock the
remote transmitter.
3. Move Child lock tab
back to the left to unlock the remote transmitter.
4. Replace the battery cover.
!
NOTE: To temporarily unlock the remote transmitter press (in order)
I. Temperature Down then J. Temperature Up then K. Dimmer
Down.
When the remote transmitter's backlight is illuminated the Child Lock
is bypassed. When the backlight is off the Child Lock is re-activated.
Frequency Interference
If the fireplace does not respond properly to the remote control, the
remote operating frequency may have to be reset. The remote control
can send another frequency code to the circuit board to eliminate
interference.
1. Simultaneously press the
Q. Purifire™ Speed Down
2. COD" will appear in place of the sleep timer digits. "
3. Release the
Speed Down
Figure 6
O. Sleep Timer Down button and the
O. Sleep Timer Down button and the
button.
Unlocked
Child lock Tab
button on the remote control.
13
Locked
Q. Purifire™