Call Waiting - Volvo XC90 Owner's Manual

Privacy handset
If you wish to speak without disruptions, use
the privacy handset. Lift the handset and
press (A).
– Select the desired telephone number
using the centre console keypad and lift
the handset to place the call. Adjust the
volume with the dial on the side of the
handset.
– The call is ended when you replace the
handset in its holder.
– If you wish to switch to a handsfree unit
without ending the call: press
steering wheel keypad (or control panel
menu buttons) and select Handsfree.
Press ENTER and replace the handset in
its cradle. If the handset is already
removed from its cradle, the ringing party
A
will be audible in the handsfree system.
Press the MENU button, scroll to
Handset and press ENTER in order to
transfer to the handset.
Last number called
The telephone automatically stores the last
telephone numbers/names called.
– Press ENTER in the steering wheel or
control panel keypad.
– Use the menu buttons to scroll forward or
back through the last numbers dialled.
They are shown in the display.
– Press ENTER.
Speed dial
Storing speed dial numbers
A number stored in the phone book can be
linked to a speed dial button (1-9) as follows:
– Select Phone book on the menu and
press ENTER.
– Scroll to Speed dial, Menu 3.3, and press
ENTER.
– Select which number is to be the speed
dial number. Press ENTER to confirm.
– Search for the desired name or phone
on the
number in the phone book. Press ENTER
to select.
Infotainment system
Using speed dial
To make a call, press and hold the desired
speed dial button for two seconds or press
the button briefly and then press ENTER.
NOTE! Once you switch on the telephone,
wait a moment before using speed dial. If you
wish to use a speed dial number, Menu 3.3.1
must be activated.

Call waiting

If you hear two beeps in your speaker during
a phone call, someone else is calling. This
function can be selected or deselected in the
menu.
In this mode, you can choose to either take
the call or refuse it. If you do not wish to take
the call, press EXIT/CLEAR or do nothing.
If you do wish to take the call, press ENTER.
Your current call will be put in "park mode". If
you press EXIT/CLEAR, both calls will be
terminated.
ONR