Maintenance and service
Replacing bulbs
Rear fog lamp
– Insert a slotted screwdriver as indicated
by the arrow in the illustration.
– Prise out the lamp insert.
– Turn the lamp insert anticlockwise and
pull out the bulb.
– Replace the bulb.
NTU
Number plate lighting
– Switch off all lights and turn ignition key
to position 0!
– Remove the screw with a screwdriver.
– Carefully detach the entire lamp housing
and withdraw it. Turn the connector
anticlockwise and pull out the bulb.
– Replace the bulb.
– Refit the contact and turn clockwise.
– Refit the entire lamp housing and screw it
into place.
Courtesy lighting
Courtesy lighting is found under the
dashboard on the driver and passenger
sides. Do as follows to replace the bulb:
– Insert a screwdriver and gently turn so
that the lamp housing comes loose.
– Remove the blown bulb.
– Replace the bulb. Check that the bulb
lights.
– Refit the lamp housing.