Replacing Bulbs - Volvo XC90 Owner's Manual

Replacing bulbs

Dipped beam, main beam,
direction indicator, parking lamp
and side marker light
The entire lamp insert must first be removed
when replacing dipped beam, main beam and
parking lamp bulbs. To replace one of these
bulbs, do the following and then consult the
instructions for the specific lamp.
– Switch off all lights and turn ignition key
to position 0.
– Open the bonnet.
– Release the insert by pulling up the two
lock pins holding it in place.
– Lift the insert straight out.
– Unplug the connector by first pressing in
the catch from underneath and then
pulling it up a bit from above.
– Lift out the entire headlamp insert and
place it on a soft surface so as not to
damage the lens.
Refit the headlamp insert in reverse order.
Check that the lock pins are correctly
situated.
Maintenance and service
1
2
4
5 3
Location of bulbs in front lamp
1. Dipped beam
2. Main beam
3. Direction indicator
4. Parking lamp
5. Side marker lamps
NTP