Bulbs in the cargo compartment
– Insert a screwdriver and gently turn so
that the lamp housing comes loose.
– Remove the blown bulb.
– Replace the bulb. Check that the bulb
lights.
– Refit the lamp housing.
Vanity mirror
– Insert a slotted screwdriver at the side of
the centre clip in the bottom edge of the
mirror. Lift up so the centre clip releases.
– Slide the screwdriver from side to side so
that the outer clips release.
– Lift out the mirror insert.
– Replace the bulbs.
– Refit the insert top edge first. Be sure that
the upper clips are properly depressed
before pressing the insert back.
Maintenance and service
NTV