Direction indicators
The bulbs are housed in bayonet holders.
– Turn the bulb holder anticlockwise and
remove.
– Press in the bulb, turn anticlockwise and
remove.
– Fit the new bulb by pressing it into the
recess and then turning clockwise.
Side indicator lamp
– Switch off all lights and turn ignition key
to position 0.
– Prise out the lamp housing from under-
neath using a small slotted screwdriver.
– Turn the bulb holder ¼ turn anticlockwise
and pull straight out.
– Pull the defective bulb straight out.
– Replace with a new bulb and press the
lamp straight in.
Maintenance and service
Fog lamps
– Switch off all lights and turn ignition key
to position 0.
– Turn the bulb holder slightly
anticlockwise.
– Remove the lamp.
– Put the new bulb in place. The profile of
the bulb holder matches the one on the
foot of the lamp.
– Refit the bulb holder by turning slightly
clockwise. "TOP" should be up!
NTR