Volvo XC90 Owner's Manual page 175

Maintenance and service
Replacing bulbs
Dipped beam lamp
– Undo the outer cover by turning it
anticlockwise.
– Unplug the connector.
– Disconnect the spring clamp. First push
to the right so that the spring clamp
disconnects, then out and down.
– Pull out the bulb.
– Fit the new bulb. It can only be fitted in
one position.
– Press the spring clamp up and a little to
the left so that it fastens in its catch.
– Press the connector back in place.
– Screw the cover back into place; the
marking "HAUT" should be at the top.
NTQ
Main beam lamp
– Undo the outer cover by pulling it straight
out.
– Unplug the connector.
– Disconnect the spring clamp. First push
to the right so that the spring clamp
disconnects, then out and down.
– Pull out the bulb.
– Fit the new bulb. It can only be fitted in
one position.
– Press the spring clamp up and a little to
the left so that it fastens in its catch.
– Press the connector back in place.
– Refit the cover.
Side marker lamps and
position/parking lamps
The bulbs are housed in bayonet holders.
– Turn the bulb holder anticlockwise and
remove.
– Pull the bulb straight out.
– Fit the new bulb by carefully pressing it
into the recess.
– Fit the bulb holder back in place and turn
clockwise.