Call Waiting - Volvo V50 Owner's Manual

Privacy handset (option)
Making a call using the handset:
– Dial the number using the keypad on the
centre console and lift the handset to
make the call. Press the handset down
before lifting it.
The call is ended when the handset is hung
back in its cradle.
Adjust the handset volume using the dial on
the side of the handset.
To switch to handsfree without ending the
call:
– Press the right arrow on the steering
wheel keypad (or the menu button on the
control panel) and select Handsfree.
Press ENTER and return the handset to
its cradle. If the handset is already
removed from its cradle at the start of a
call, the other party will be audible via the
handsfree system. Press the MENU
button, scroll to Handset and press
ENTER in order to transfer to the handset.
Last dialled number
The telephone automatically stores the last
telephone numbers/names called.
Calling the last dialled number:
– Press ENTER on the steering wheel
keypad or control panel (when in active
mode).
– Use the navigation buttons to scroll
forward or back through the last numbers
dialled. These are shown on the display.
– Press ENTER.
Speed dial
A number stored in the phone book can be
linked to a speed dial button (1-9).
– Select Phone book on the menu and
press ENTER.
– Scroll to Speed dial , menu 3.4, and press
ENTER.
– Select which number is to be the speed
dial number. Press ENTER to confirm.
Infotainment system
– Search for the desired name or phone
number in the phone book. Press ENTER
to select.
– To make a call, press and hold the
desired speed dial button for two
seconds or press the button briefly and
then press ENTER.
NOTE! When the telephone is switched on, it
takes a while before speed dialling is
available. Menu option 3.4.1 must be
activated to use the speed dial function.

Call waiting

A two-tone signal during a telephone call
indicates that there is another incoming call.
The display shows: Answer?
Receiving a call:
– Press ENTER. Your current call will be put
on hold.
– Select Hold/Resume to finish the call and
return to a call on hold.
To reject the incoming call: Press EXIT.
To end the current call: Press EXIT. The
function can be de-selected in the menu.
Functions during a call
Several functions are available during a call.
203