Volvo XC90 Owner's Manual page 74

Power seat (option)
Preparations
The seat is normally adjusted with the ignition
key is in position I or II. It can also be
adjusted within 4,5 minutes of the door being
unlocked with the key or remote control. If the
door is closed and the ignition key is not yet
in the ignition, or is in the 0 position, adjust-
ments can be made within 40 seconds of the
door being closed.
Memory function in remote control
The remote control used to unlock the car
stores information about the changes made
to the seat settings. When the car is next
unlocked with the same remote control and
the door is opened within five minutes, the
driver's seat and the door mirrors assume the
stored positions.
Seat adjustment
The switches can be used to make the
following adjustments:
1. Front edge of seat cushion up/down
2. Seat forward/rearward
3. Seat up/down
4. Backrest rake
The seat can be moved in one direction at a
time. The power seats have an overload
protector that activates if a seat is blocked by
an object. If this occurs, switch off the ignition
(position 0) and wait 20 seconds before
operating the seat again.
Seat with memory function
5. Setting seat and door mirrors,
program 1
6. Setting seat and door mirrors,
program 2
7. Setting seat and door mirrors,
program 3
8. Storing preset positions
Three positions can be stored. After
adjusting the seat, hold the MEM (8) button
depressed while pressing the button (5).
Further seat and door mirror settings can be
stored using memory buttons (6) and (7).
Interior
TP