Ptz > Ptz Settings - Vivotek FD8162 User Manual

VIVOTEK
PTZ > PTZ settings
Advanced Mode
This section explains how to control the Network Camera's Pan/Tilt/Zoom operation�
Digital: Control the e-PTZ operation� It allows users to quickly move the focus to a pre-
configured target area for close-up viewing without physically zooming the camera.
Digital PTZ Operation (E-PTZ Operation)
If you select "Digital", the e-PTZ control settings section will be displayed as shown below:
2010/12/10 17:08:56
Select stream: Select one of the stream 1~3 to set up the e-PTZ control� Please note that each stream
can be set up with its own preset and patrol settings� Refer to the following page for details about how to
set up preset and patrol settings�
Auto pan/patrol speed: Select the speed from 1~5 (slow/fast) to set up the Auto pan/patrol speed control�
When completed with the settings of e-PTZ, click Save to enable the settings on this page�
User's Manual - 83