Vivotek FD8162 User Manual page 119

daylight_enable
daylight_dstactualmo
de
daylight_auto_beginti
me
daylight_auto_endtim
e
daylight_timezones
updateinterval
restore
reset
restoreexceptnet
restoreexceptdst
<boolean> 6/6
<boolean> 6/7
string[19] 6/7
string[19] 6/7
string 6/6
0, 6/6
3600,
86400,
604800,
2592000
0, 7/6
<positive
integer>
0, 7/6
<positive
integer>
<Any value> 7/6
<Any value> 7/6
Yakutsk
380: GMT 09:30 Adelaide, Darwin
400: GMT 10:00 Brisbane, Canberra, Melbourne,
Sydney, Guam, Vladivostok
440: GMT 11:00 Magadan, Solomon Is., New
Caledonia
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
Enable automatic daylight saving time in time zone.
Check if current time is under daylight saving time.
(Used internally)
Display the current daylight saving start time.
Display the current daylight saving end time.
List time zone index which support daylight saving
time.
0 to Disable automatic time adjustment, otherwise,
it indicates the seconds between NTP automatic
update intervals.
Restore the system parameters to default values
after <value> seconds.
Restart the server after <value> seconds if <value>
is non-negative.
Restore the system parameters to default values
except (ipaddress, subnet, router, dns1, dns2,
pppoe).
This command can cooperate with other
"restoreexceptXYZ" commands. When cooperating
with others, the system parameters will be restored
to the default value except for a union of the
combined results.
Restore the system parameters to default values
except all daylight saving time settings.
This command can cooperate with other
VIVOTEK
User's Manual - 119