Vivotek FD8162 User Manual page 151

uart_httptunnel <boolean>
transmission_mode Tx,
Rx,
Both
network_wire <boolean>
network_wireless <boolean>
wireless_s802dot11b <boolean>
wireless_s802dot11g <boolean>
wireless_encrypt_we <boolean>
p
wireless_encrypt_wp <boolean>
a
wireless_encrypt_wp <boolean>
a2
wireless_beginchann 1 ~ 14
el
wireless_endchannel 1 ~ 14
derivative_brand <boolean>
npreset 0, <positive
integer>
eptz 0, <positive
integer>
nanystream 0, <positive
integer>
iva <boolean>
tampering <boolean>
test_ac <boolean>
version_onvifdaemo <string>
0/7 Indicate whether to support HTTP tunnel for UART
transfer.
(not used in FD8162)
0/7 Indicate transmission mode of the machine: TX =
server, Rx = receiver box, Both = DVR.
0/7 Indicate whether to support Ethernet.
0/7 Indicate whether to support wireless.
0/7 Indicate whether to support wireless 802.11b+.
0/7 Indicate whether to support wireless 802.11g.
0/7 Indicate whether to support wireless WEP.
0/7 Indicate whether to support wireless WPA.
0/7 Indicate whether to support wireless WPA2.
0/7 Indicate the begin channel of wireless network
0/7 Indicate the end channel of wireless network
0/7 Indicate whether to support the upgrade function
for the derivative brand. For example, if the value
is true, the VVTK product can be upgraded to
VVXX. (TCVV<->TCXX is excepted)
0/7 Number of preset locations
0/7 A 32-bit integer, each bit can be set separately as
follows:
Bit 0 => stream 1 supports ePTZ or not.
Bit 1 => stream 2 supports ePTZ or not.
The rest may be deduced by analogy
0/7 number of any media stream per channel
0/7 Indicate whether to support Intelligent Video
analysis
0/7 Indicate whether to support tampering detection.
0/7 Indicate whether to support test ac key.
0/7 Indicate ONVIF daemon version
VIVOTEK
User's Manual - 151