Vivotek FD8162 User Manual page 137

7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE
brightness -5~5
saturation -5~5,100
saturationpercent 0~100
contrast -5 ~ 5
sharpness -3~3,100
sharpnesspercent 0~100
gammacurve 0~100
lowlightmode <boolean>
profile_i0_enable <boolean>
profile_i0_policy day,
night,
schedule
profile_i0_begintim hh:mm
e
profile_i0_endtime hh:mm
profile_i0_contrast -5 ~ 5
profile_i0_sharpne -3~3
ss
profile_i0_sharpne 0~100
sspercent
profile_i0_gammac 0~100
urve
profile_i0_lowlight <boolean>
mode
profile_i0_wdrcstre 0~2
ngth
profile_i0_wdrcmo 0~3
SECURITY DESCRIPTION
(get/set)
4/4 Adjust brightness of image according to mode
settings.
4/4 Adjust saturation of image according to mode settings.
100 for saturation percentage mode.
4/4 Adjust saturation value of percentage when
saturation=100
4/4 Adjust contrast of image according to mode settings.
4/4 Adjust sharpness of image according to mode settings.
4/4 Adjust sharpness value of percentage when
sharpness=100
4/4 Gamma curve.
4/4 Enable/disable low light mode.
4/4 Enable/disable this profile setting
4/4 The mode which the profile is applied to.
4/4 Begin time of schedule mode.
4/4 End time of schedule mode.
4/4 Adjust contrast of image according to mode settings.
4/4 Adjust sharpness of image according to mode settings.
4/4 Adjust sharpness value of percentage when
sharpness=100
4/4 Gamma curve
4/4 Enable/disable low light mode.
4/4 WDR enhanced
0: low
1: medium
2: high
4/4 WDR enhanced
VIVOTEK
User's Manual - 137