Vivotek FD8162 User Manual page 145

level 0~7
setparamlevel 0~2
7.25 SNMP
Group: snmp (capability.snmp > 0)
NAME VALUE
v2 0~1
v3 0~1
secnamerw string[31]
secnamero string[31]
authpwrw string[8~128]
authpwro string[8~128]
authtyperw MD5,SHA
authtypero MD5,SHA
encryptpwrw string[8~128]
encryptpwro string[8~128]
encrypttyperw DES
encrypttypero DES
rwcommunity string[31]
rocommunity string[31]
6/6 Levels used to distinguish the importance of the
information:
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
6/6 Show log of parameter setting.
0: disable
1: Show log of parameter setting set from external.
2. Show log of parameter setting set from external and
internal.
SECURITY DESCRIPTION
(get/set)
6/6 SNMP v2 enabled. 0 for disable, 1 for enable
6/6 SNMP v3 enabled. 0 for disable, 1 for enable
6/6 Read/write security name
6/6 Read only security name
6/6 Read/write authentication password
6/6 Read only authentication password
6/6 Read/write authentication type
6/6 Read only authentication type
6/6 Read/write passwrd
6/6 Read only password
6/6 Read/write encryption type
6/6 Read only encryption type
6/6 Read/write community
6/6 Read only community
VIVOTEK
User's Manual - 145